Out Around the Barn

Meet “Charlie” our newest Rooster

Here we are and it is March already.  Spring will be here before we know it and so will everything new.  New grass, flowers, leaves on the trees and the wonderful smell of Spring air.  With this comes new life.  I am talking of the birth of the new babies on the farm.  Right now we have new kids, goats, and one little calf so far, more to come.  We also have baby chicks.  These babies arrived as a surprise.

My hens are just now beginning to lay heavily again and when they start wanting to set in the next month or so, I’ll let them.  Then we’ll have an abundance of chicks.  But, for now, we have brought our 14 chicks into the house to keep them warm until they can survive out in the barn.  They are in our utility room in a large water tank with a 60 watt bulb for warmth and food and water.

There are a few things you need in your farm supplies to accomplish this and they are cheap and easy to obtain.  A cage or something that you can put them in to contain them with plenty of room, a small chicken feeder, a waterer, a heat source and bedding.  We use sawdust in the bottom and it has been quite effective.  It is  easy to change when it gets dirty and doesn’t take much to cover the bottom.

 Have fun on the farm and take the time to  watch your animals grow.

Well, we have done it, we have made it through our goat birthing season.  I am now at ease.  It began on Christmas Day with our first birth.  Barbie went into labor during the coldest weather, 0 degrees, and lost both of her twins.  It was so cold that she didn’t have time to clean them up before they froze.  Two days later, Noel gave birth to triplets and she lost hers as well.  By the time we got the rags and some warm water she had delivered all three and they were all still born.  Not a good start to my idea of increasing my herd.  Five days later, Polly delivered one baby, still born.  It was difficult to deal with.  I had been looking forward to the new kids and was losing them all.

It didn’t seem to matter what we did, nothing could have saved them as I look back on the situation.  I started watching my remaining four nannies on a schedule.  Checking them in the morning, at noon, afternoon, evening and before bed.  I wanted to have something set up where they could have warmth and a dry place to deliver.  So we brought in some fresh straw and with the pitchfork, scattered it around the barn and in the two jugs that we set up with the fencing supplies we had so that we could separate them and their babies would be safe from the rest of the herd.

Read the rest of this entry »

It is definitly that time of year, mud everywhere.  It is a nuisance to walk outside to the car or to the mailbox and have your feet covered in mud.  It gets all over your car and it ruins your good shoes.  But what can you do, not much. 

Out around the barn the mud is much worse and it can become a problem.  If you feed outside the barn the mud will just continue to get more messy and harder to get around in.  It is hard on the cattle and hard on you.  Then when it freezes the ground is so uneven that it is difficult to walk on. 

So, what do we do?  I don’t know about everyone else but, the one thing we do is move our feeders around every few weeks to keep the mud from becoming a problem.  If it does become an issue, there are times when we had to just haul in more rock.  There are some areas around here that I know are 10 inches or more deep with rock that has been built up over the years. 

The other way is to feed on concrete but that can also get messy and pretty quick.  Then you just have to clean, clean and clean.  And if not careful, it can get pretty slick.  I know that when it does get in that condition it can be hazardous.  The concrete can be as slick as glass and a broken leg can happen pretty easily.

Another thing we do is drag the ground area around the feeders.  When the ground is still muddy yet a little frozen, we pull the drag behind the tractor and even out the ground.  Now, I don’t do this myself, but  Al does on a pretty regular basis.  He usually does this at the same time he puts out hay for the cattle and horses. 

We do the same procedure around the hay feeders.  They are easy enough to pick up with the tractor and move every time we put out a new bale.  This keeps the area from becoming too much of a mess and the grass will grow back come Spring. 

Everyone does things differently but this just might give you another idea.  I do know that a drag is a must on the farm and an important part of our farm equipment.  We have ours made from 5 old tires, halved and attached together in a triangular shape with a chain that hooks to the tractors hitch.  It does a great job.

In todays economy we have to make use of all the things that we already have on hand.  We just cannot afford to go out and buy new stuff and put it on our credit cards anymore so we must improvise.  It is amazing what you can find around the barn, house or yard that you can make use of.

On of the things that we have started getting a lot of use out of is a drop sided wagon.  (Look in the background of the above picture in the doorway of the barn, and you will see our wagon.)  If and when we need to haul several buckets of feed at once but really don’t need the truck or tractor, it comes in very handy.  A bale of straw or hay fits in it just perfect and you can pull it with you right into the barn.  This little wagon can go places that other equipment cannot even fit into.    It has rubber tires and maneuvers well.  Having a bad back, it has became one of the farm supplies that I cannot do without.  It saves me from having to carry feed out to the cattle because I can just load the buckets and pull them out to the feeders  in the wagon, unload and dump.  The stress and strain is no longer a problem.

Another item I have made use of is a hard rubber water trough.  I placed it up next to the house under a downspout and now collect rain water in it.  I have discovered that by using rain water on my seedlings and plants  in my green house is better for them than city water with all the chlorine.  I bottle it in milk jugs and plastic bottles and store it to use for my house plants all year round.  It really works great.   Even in the winter, I’ll fill the jugs and keep my supply stocked.  I only have a problem if it freezes. 

Look around, see what you can use out of all the things you already have.  You may be surprised.

If you have animals you will have to have some type of livestock feeders to feed them.  Now, I do not mean cats and dogs, I’m talking cattle, horses, goats, sheep, pigs and such.  Depending on the animal or animals you have will tell you what size you will need.

Goats, sheep and pigs usually need a low feeder where the trough is low to the ground or sits directly on the ground.  This makes it easy for them to reach.  Horses and cattle, unless  babies, can be higher.  High enough so that they do not have to eat off the ground and low enough that they can easily reach without struggling to reach their feed. 

Once you have determined the size, how high and how many will be eating from this one feeder, you will need to purchase supplies.  That will include lumber, treated or non-treated, some 2×4’s and 2×6’s, strong sturdy posts and some screws.  How much of these will depend on the size of the feeder you want to build.  Then you get your measuring tape, saw, hammer, if using nails, drill and begin to build.  I am certain that if you do not have an idea of how to do this you can find instructions on the internet or contact your local farm bureau.   It will take some time but in the end well worth it.

On the other hand, you can purchase livestock feeders at any online or storefront farm supply company.  There are several to choose from, all shapes and sizes.  If you are not one to build things or work with your hands, then this may be the way to go.  Check out our website by clicking on livestock feeders and look around.  Click out our affiliate “Barn World” and you will also find some feeders and ideas there.

Fall has arrived and we are preparing for the winter months ahead.  Now is the time to clean and winterize your tools and equipment.  One thing that I have learned is to not put tools away with dirt on them.  I never considered that a problem until it was pointed out to me several years ago. 

I didn’t realize that I could prevent my tools from rusting over the winter months just by doing about 30 minutes of cleaning and maintaining in the fall. 

For garden tools, shovels, pitchforks and the like, wipe them clean of dirt and mud and then wipe them down with vegetable oil or cooking spray.  This will keep them clean and rust free.  Waterers and feeders that are not in use during the winter months need cleaned thoroughly, dried and put away in storage until needed.  The best way to clean these are to wash them down, if not able to immerse them, with hot sudsy bleach water and then rinse well and let air dry. 

The same pertains to bridles, saddles, harness and reins for your horses.  If not maintained during the times of non-use, they can grow mold and become dry and brittle.  It is advisable to clean them well and use a product like Leather Therapy to keep them in good shape at least every six months.  Depending on use of your equipment, you may need to do it more or less.

This process goes for just about anything that you store for several months at a time.  Just like my Lawnmower tractor and wagon that I pull behind it to do yard work.  I clean them, wash them down and then store them in the shed or barn out of the weather.  This keeps them in good condition and ready for use come Spring.  This also applies to heavy farm equipment such as tractors, hay wagons , hay racks, combines, disks, brush hogs and etc.

Just a little maintenance in the Fall saves a lot of work in the Spring.